ID550 Weighing Controller SS Body

Product Features

6-bit super large LED display with a word height of 33.4mm, available in red or green. Supports CPA 6000e certification accuracy and up to 200,000 display divisions.
Built-in switch power supply, supports wide voltage AC 85-264V power supply.
Built-in charging circuit, can be equipped with a 6V4.0AH lead-acid rechargeable battery.
Standard supports serial ports x 2: COM1 (RS232) + COM2 (RS485).
Standard supports MODBUS-RTU, continuous transmission, command input and output, SICS, and barcode scanner input.

Optional supports for add-ons

6-bit LED display

Supports analog scale input x 1, and up to 6 load cells

Supports 60,000 display divisions

Standard with serial port x 1 RS232/485

Standard supports MODBUS-RTU, PROFINET communication interface board (dual LAN ports, built-in switch, Siemens PLC)

Options:

• scale x 1 4-20 mA (16-bit precision DAC)

• In x 4 / OC Out x 6

• In x 4 / Relay Out x 6

  
  

Multiple calibration modes

• Supports up to 2-point weight calibration

• Calibration without weights

• Remote calibration via PLC communication interface

• Remote calibration via MODBUS-RTU communication interface

Supports applications

• Basic weighing version

• Material level weighing

• Single-speed/dual-speed preset point fixed value control

• Lower/upper limit level detection

Working power supply: DC 24VDC, the maximum power consumption of the complete machine is less than 6 W

Order No.: 8550009

Model No.: ID550H00000G

ID550, Harsh, 

Green LED, 

1 serial port(RS232/485), 

MODBUS-RTU, 

Basic software version, 

220VAC, GB power cord

• 6-digit Green LED display

• Support 1-way analog scale, supporting up to 6 sensors

• CPA 3000e certification accuracy, up to 60000 display divisions

• Standard configuration with 1 serial port RS232/485

• Standard configuration supporting MODBUS-RTU, PROFINET, Simens PLC, LANX2, Built-in Switch, etc.

• Options:

• Multiple calibration modes

• Support application:

• Working power supply: