6-bit LED display Supports scale x 1 analog scale input, and each channel supports up to 4 load cells input Accuracy according to the metrological approval (CPA) 3000e, with a maximum display resolution of 60,000 Standard with serial port x 1 RS232/485 Standard supports MODBUS-RTU Standard with In x 8 / OC Out x 8 or In x 8 / OC Out x 12 Applications
Basic weighing application with two-speed setpoint control (In x 8 / Out x 8 version)
Force application (In x 8 / Out x 8 version)
Bagging scale application (In x 8 / Out x 12 versions)
Working power supply:
DC 24VDC, the maximum power consumption of the complete machine is less than 6 W (In x 8 / Out x 8 version)
AC 85-264VAC, the maximum power consumption of the complete machine is less than 6 W (In x 8 / Out x 12 version)
7-bit LED display Supports 1 analog scale input, with a maximum of 12 load cells Certification: CPA 6000e, division up to 150,000 Standard with serial port x 1 (RS232/485), 2 LAN ports, and 1 high precision weighing AD Standard supports for MODBUS-RTU and MODBUS-TCP (for single LAN port version only) Optional PLC communication interface
PROFINET (dual LAN ports, built-in switch, Siemens PLC), certified by siemens PN consistency test
EtherNet/IP (dual LAN ports, built-in switch, rockwell PLC, Delta PLC)
CC-link IE FB (Mitsubishi PLC)
EtherCAT (HIAS PLC)
Optional I/O (input/output)
In x 4 / MOS Out x 6.
Multiple calibration modes
Supports up to 5-point weight calibration
Calibration without weights
Remote calibration through PLC communication interface
Calibration with material
Application supports
Basic weighing version
Supports dual-speed preset point control and 8 simple comparison outputs
Lower/upper limit material level detection
The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W
6-bit LED display Supports analog scale input x 1, and up to 6 load cells Supports 60,000 display divisions Standard with serial port x 1 RS232/485 Standard supports MODBUS-RTU, PROFINET communication interface board (dual LAN ports, built-in switch, Siemens PLC) Options:
scale x 1 4-20 mA (16-bit precision DAC)
In x 4 / OC Out x 6
In x 4 / Relay Out x 6
Multiple calibration modes
Supports up to 2-point weight calibration
Calibration without weights
Remote calibration via PLC communication interface
Remote calibration via MODBUS-RTU communication interface
Supports applications
Basic weighing version
Material level weighing
Single-speed/dual-speed preset point fixed value control
Lower/upper limit level detection
Working power supply: DC 24VDC, the maximum power consumption of the complete machine is less than 6 W
