ID551PN weighing display controller mainly serves PLC control system or DCS, computer management control system. The indicator transmits the weight to PLC or DCS, computer, automatic equipment, force measuring device, filling and other weighing constant value control systems through serial port or Ethernet port or PROFINET Industrial Ethernet.
7-bit LED display Supports 1 analog scale input, with a maximum of 12 load cells Metrological approval (CPA) 6000e certified accuracy, OIML: 6000e. Have got OIML & CE certificates Standard with serial ports x 2 RS232+RS232/485 or serial ports x 2 RS232+RS485 with one LAN port Standard supports MODBUS-RTU, MODBUS-TCP (only supported by the ethernet version) Optional PLC communication interface
PROFIBUS-DP (Siemens PLC)
PROFINET (dual LAN ports, built-in switch, Siemens PLC)
EtherNet/IP (dual LAN ports, built-in switch, Rockwell PLC, Delta PLC)
CC-Link (Mitsubishi PLC)
4-20mA (16-bit precision DAC) x 1
4-20mA (16-bit precision DAC) x 2
I/O (input/output options)
In x 8 / OC Out x 12
In x 8 / Relay Out x 12
Multiple calibration modes
Supports up to 5-point calibration
Calibration without weights
Remote calibration through PLC communication interface
Application supports
Basic weighing version
Supports dual-speed preset point control and 8 simple comparison outputs
Lower/upper limit material level detection
The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W;
7-bit LED display Supports 1 analog scale input, with a maximum of 12 load cells Certification: CPA 6000e, division up to 150,000 Standard with serial port x 1 (RS232/485), 2 LAN ports, and 1 high precision weighing AD Standard supports for MODBUS-RTU and MODBUS-TCP (for single LAN port version only) Optional PLC communication interface
PROFINET (dual LAN ports, built-in switch, Siemens PLC), certified by siemens PN consistency test
EtherNet/IP (dual LAN ports, built-in switch, rockwell PLC, Delta PLC)
CC-link IE FB (Mitsubishi PLC)
EtherCAT (HIAS PLC)
Optional I/O (input/output)
In x 4 / MOS Out x 6.
Multiple calibration modes
Supports up to 5-point weight calibration
Calibration without weights
Remote calibration through PLC communication interface
Calibration with material
Application supports
Basic weighing version
Supports dual-speed preset point control and 8 simple comparison outputs
Lower/upper limit material level detection
The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W
